How we work, from the first call to a finished floor.
What happens at each step, what goes into your quote, and how to check our license before you book.
★★★★★ 5.0 on Google from 12 reviews · CA license #1138381
Four steps, and you only do the first one.
Tell us about the space.
Step 1Use the form or call (626) 944-3282. Tell us the kind of space, the city and a rough size. A photo of the floor helps us plan the visit.
Free on-site visit.
Step 2We come to you, measure the space and look at the concrete: its condition, cracks, stains and old coatings. We talk through finishes and colors with you.
Your quote.
Step 3One price for your floor, based on the four things below. You decide in your own time.
Install and cure.
Step 4We prepare the concrete, build the floor in layers and finish it. Then we tell you when you can walk on it and when it's ready for cars or furniture.
What sets the price of your floor.
Size
The square footage of the floor.
Condition of the slab
Cracks, stains, old coatings and moisture all change the prep.
Prep
Getting the concrete ready is the part that decides whether a coating lasts.
System
Flake, metallic and solid finishes use different materials and steps.
Why we don't list prices.
No two floors need the same prep, and a price from a photo would only be a guess. The visit is free, so you get a real number.
Why some epoxy floors peel, and how we avoid it.
Most coating failures start in the concrete, not in the coating. Here is what goes wrong, layer by layer.
01 Peeling starts with prep.
A coating only holds as well as the surface under it. Before anything is poured, the concrete is prepared so the epoxy bonds to the slab, not to dust, oil or old sealer.
“They explained the process in detail, prepared the concrete thoroughly, and took the time to apply each layer with care.”
02 Bubbles and lifting come from moisture.
Concrete holds water and pushes it up. We look at the slab at the free visit, before you get a price, so the system matches the floor you actually have.
03 Hot-tire pickup comes from rushing the cure.
Epoxy needs time to harden before tires sit on it. We tell you when the floor is ready to walk on and when it is ready for cars.
04 Sun and heavy use call for the right topcoat.
A garage that faces the sun, a restaurant kitchen and a shop floor all wear differently. We go over topcoat options at the visit so the finish lasts in your space.
“In the kitchen, we went with a solid light gray industrial finish. It's seamless, non-slip, and super easy to clean. We power wash it often, and it holds up really well.”
Licensed and bonded in California.
Live Epoxy LLC holds California contractor license #1138381, with a contractor bond on file. You can check it yourself on the state licensing board's site.
- License
- CA #1138381
- Classification
- C-61/D-12 Synthetic Products
- Status
- Active, expires June 30, 2027
- Bond
- Contractor bond on file
About Live Epoxy.
Live Epoxy LLC is a licensed California epoxy flooring contractor based in Walnut, CA. We install metallic, flake and solid epoxy floors for garages, homes and businesses in 28 cities across Los Angeles, Orange, Riverside and San Bernardino counties. Our base is 3960 Valley Blvd in Walnut, and every job starts with a visit to see the floor.
Get a price for your floor.
A free on-site visit, then one price for your space.
★★★★★ 5.0 on Google from 12 reviews · CA license #1138381
